About focuslaser

This author has not yet filled in any details.
So far focuslaser has created 26 blog entries.

What is the Fiber laser machine?

By |2022-08-08T17:24:37+08:00August 8th, 2022|Blog|

Fiber laser are the most common laser types for material processing including laser marking, laser engraving, and laser cutting. Negligible maintenance and virtually zero requirement of consumables. For Fiber Laser, the estimated lifetime for laser source will be around 100,000hours under standard working conditions. There’re 2 types of Fiber laser: Q-Switched- Most popular type of

What is the difference between Laser Marking And Engraving

By |2022-08-08T17:22:34+08:00August 8th, 2022|Blog|

Laser engraving works by using a high-powered laser to physically remove the surface layer of the material, creating a cavity that reveals an image. It’s typically used for logos, barcodes, QR codes and other text markings on plastics and metals. Laser marking works by using a low-powered laser to mark the surface of a material without destroying the material itself. This is

What Is A Fiber Laser, And Which One Should You Get?

By |2022-08-08T17:19:31+08:00August 8th, 2022|Blog|

What is a Fiber Laser? A fiber laser is a type of laser that uses a fiber optic cable as its gain medium. They are used in a variety of applications including medical, industrial, and scientific. There are many different types of fiber lasers, each with their own advantages and disadvantages. The type of

How to mark stainless steel cups with a rotary

By |2022-08-08T17:03:57+08:00August 8th, 2022|Blog|

1.Prepare the design files in vector format (SVG/AI/PLT/DXF etc) for laser engraving. 2.Set up the rotary device. Make the Rotary connect to the laser marking machine. Measure Cups diameter and adjust the rotary position, focal length and marking area. (Experiment with different speed and power settings if needed.) 3.We always suggest to keep one

How to mark rings with a rotary

By |2022-08-08T14:40:05+08:00August 8th, 2022|Blog|

1.Set up the rotary device and measure the inside and outside diameter of rings. 2.To input diameter to EZCAD software and adjust the speed and power settings if needed. 3.Adjust the rotary position, focal length and marking area. 4.We always suggest to keep onesample as testing sample. 5.After you are finish the testing and

How many different materials can a UV laser machine engrave?

By |2022-07-31T14:03:41+08:00July 31st, 2022|Blog|

In comparison to CO2 and Fiber laser technology, UV laser technology is significantly different. UV engrave using a cold laser. This technology often known as the blue laser beam, has the ability to engrave with a very low rate heat. One of the key factors in this technology's ability to engrave over a variety of materials

2D QR Code Fiber Laser marking machine

By |2022-07-31T11:19:16+08:00July 31st, 2022|Blog|

Fiber laser marking machine is suitable for marking QR codes, Barcode and other identifications on metals and nonmetals surfaces. Firstly, you can use an online QR code generator or utilize a QR code software to make your own QR Codes and export it as an vector files (SVG/AI/PLT/DXF etc). Of course, you can definitely print

What does a Invaid device handle message mean in Ezcad software?

By |2020-12-07T17:58:23+08:00December 7th, 2020|Blog|

What does a Invaid device handle message mean in Ezcad software? When use an EZCAD software sometime we may meet some problem. Today I will teach you how to solve a “ Invaid device handle” message problem. Solution: 1. Check if installed driver correctly 2. Change a USB port 3. Change a USB cable

Can a UV laser marking machine produce colors on stainless steel?

By |2020-12-05T14:23:29+08:00December 2nd, 2020|Blog|

Can a UV laser marking machine produce colors on stainless steel? We have heard that fiber laser marking machine can make color on stainless steel, and then many people have doubts. UV laser marking machine has a wider range than fiber laser marking machine. Can UV laser marking machine make color on stainless steel? The answer is

QR Code Laser Engraving Machine

By |2020-12-02T18:04:10+08:00December 1st, 2020|Blog|

QR Code Laser Engraving Machine With the development of QR code in recent years, people are gradually familiar with it. The QR code is widely used not only in commodities and daily necessities, but also in the auto parts industry. Automobiles have a lot to do with consumers' purchase, maintenance, and claims. With the QR