sora

About sora

This author has not yet filled in any details.
So far sora has created 165 blog entries.

How to Setting marking parameters in fiber laser marking machine software

By |2020-04-21T14:34:02+08:00April 21st, 2020|Blog|

How to Setting marking parameters in fiber laser marking machine software In marking metal and plastic,There is a setting parameter range for reference to test in the fiber laser marking machine software . Speed 100-2000 adjustable,Power 30-80 adjustable,Frequency 5-30. Depends on different materials and the marking effects you want so for a new operator

The different of 20w,30w and 50w laser marking machine

By |2020-04-21T14:29:25+08:00April 21st, 2020|Blog|

The different of 20w,30w and 50w laser marking machine Firstly,it is focuslaser machine watt. 20w can do simple surface marking. 30w can do faster surface marking,and deep engraving,thin metal cutting. 50w can do a little faster deep engraving and thin metal cutting work. They use it to do deep engraving on gun firearm industry

The Advantages Of Laser Welding Machine

By |2020-04-21T10:36:34+08:00April 21st, 2020|Blog|

The Advantages Of Laser Welding Machine The main features of laser welding are as follows: (1)The heat input is small, the weld width to width ratio is large, and the heat affected zone is small, resulting in small shrinkage and deformation of the workpiece, and no post-weld orthopedics are required; (2)high weld strength, fast

1000w laser welding machine

By |2020-04-21T10:29:22+08:00April 21st, 2020|Blog|

1000w laser welding machine 1000w laser welding machine. From last year,the laser welding machine is more and more popular~~Especially the handheld laser welding machine. It is easy to operate,the welding edge is smooth,mostly no need second processing.And you can use hand to control the welding speed,angle,etc. Why the handheld laser welding machine is so

Why should I buy a laser for acrylic cutting?

By |2020-04-20T18:01:02+08:00April 20th, 2020|Blog|

Why should I buy a laser for acrylic cutting? Acrylic (PMMA) is ideal for laser processing projects such as illuminated advertisements, signage, point of sales displays and more. Without any additional post-processing, the laser cuts result in shiny, flame polished edges. Panels up to 25 mm thick can be cut efficiently and cost-effectively. Acrylic

Can paper burn during laser cutting?

By |2020-04-20T17:54:08+08:00April 20th, 2020|Blog|

Can paper burn during laser cutting? Paper is evaporated like wood, i.e. sublimated. During the cutting process, the paper is worn away in the form of a gas, visible as smoke, at high speed. The smoke transports the heat away from the paper, whereby the material is only minimally thermally burdened. With optimum parameters,

Can all materials be lasered equally well?

By |2020-04-20T17:50:01+08:00April 20th, 2020|Blog|

Can all materials be lasered equally well? With a Focuslaser laser, you can quickly and easily laser cut a variety of textiles to size. Materials can be also be given a high-quality finish with a tactile effect. Whether you use it to engrave felt or to cut extravagant shapes out of polyester, lasers offer

What kinds of stones can be engraved with the laser?

By |2020-04-20T17:43:01+08:00April 20th, 2020|Blog|

What kinds of stones can be engraved with the laser? Laser engraving on stone is particularly suitable for polished, ideally dark natural stones such as granite, marble, or basalt. The more homogeneous and fine-grained the stone, the better the results of the stone engraving will be. However, even pebbles can be processed well with

Why should I buy a laser for marking plastics?

By |2020-04-20T17:33:25+08:00April 20th, 2020|Blog|

Why should I buy a laser for marking plastics? Non-contact laser marking is very fast as well as abrasion, heat and acid resistant. Many different plastics can be marked or engraved with a laser All kinds of contents including logos, codes, serial numbers and fully dynamic contents from ERP systems, etc. can be used