uv laser engraver

The processing methods of laser marking machine common problems

By |2020-03-19T10:58:12+08:00March 19th, 2020|Blog|

The processing methods of laser marking machine common problems As a mature marking equipment, the laser marking machine produced by Focuslaser has a very low probability of failure. The advantages of a laser marking machine are fast marking speed, fine lines and good results. It is used for many products with higher marking requirements.

How to solve the problem of laser marking machine chiller

By |2020-03-19T10:24:38+08:00March 19th, 2020|Blog|

How to solve the problem of laser marking machine chiller General processing method when no fault code is displayed. 一、 Poor cooling effect 1. Is the machine installed in a location where the temperature is too high causing poor heat dissipation? 2. Check if the condenser heat sink is dirty or the filter is

What materials can UV laser machine engrave?

By |2020-06-30T17:32:49+08:00March 13th, 2020|Blog|

What materials can UV laser machine engrave? The UV laser machine,also named uv laser marking machine which process is direct break the object chemical bond, The process generate much less heat to minimize thermal effect, processed material turn to Atom level,reduce contamination to the environment. The feature of UV laser machine is short in

uv Laser Maker Engraving Machine for aluminum

By |2020-03-11T17:40:39+08:00March 11th, 2020|Blog|

uv Laser Maker Engraving Machine for aluminum The UV marking lasers Focuslaser UV with wavelength of 355 nm are, due to a high repetition rate, particularly suitable for marking plastics (ABS, PA). They reach very high speeds which are indispensable for short cycle times in industrial manufacturing environments. With high peak powers they are most suitable for fine marking